Product Added to your Cart
x

-------- OR --------

Spluffer - Buffered signal splitter - Board Mounted

Neat little circuit to split your guitar signal without any signal loss, based on the AMZ Splitter Buffer.

This version keeps everything neatly board mounted with no wiring, unless you opt for the wired DC socket.

Designed for a mini 1590A (36 x 90mm) enclosure with DC power only in horizontal format. If you go for the board-mounted DC socket be aware you may have a small gap between the socket and the enclosure. The hole needs to be big enough to get your DC plug into without risk of shorting on the metal. If you want it 'watertight' you'll need to wire up a DC socket.

Note: The pic shows a 100nf input cap. We'll be supplying the kits with 1uf for all the signal caps so the kit is suitable for signals with more bottom end.

Oops alert - requires a small hack to connect the grounding spring to the PCB. See doc for details.


Kit includes: PCB, DC socket, board mounted components, grounding spring and jack sockets.

Pre-drilled enclosure is optional, but MUST be included if you want to order a pre-built unit.

Inspired by: AMZ Splitter Buffer

Difficulty: Easy

PCB size: 73 x 30mm


Download the INSTRUCTION PDF

SpluffOB

FuzzDog

New

£19.20 inc. tax

£16.00 ex. tax
? Tax based on United Kingdom.
Updating Order Details
Please do not refresh or navigate away from the page!

Customer Reviews

3 review(s) posted (write review)
Perfect splitter 5 product stars
"Exactly what I've been looking for without spending an arm and a leg. Even better, I could add a relay switch to one of the outputs, which is controlled by the CTLOUT of my Boss MS3. Neat as!" Alex - 12 January 2019
A unique add-on for my custom pedalboard 5 product stars
"A must have circuit that with few bucks has solved my problem. Easy to build, finished in less than 15 minutes. Put in my pedalboard, gave me FOUR noiseless outputs without loss of signal and no hum." Finnigan - 22 September 2015
Simple, effective and a reality check for the neatness of my soldering 5 product stars
"I am using a couple of self modified, Billm style Fender Blues Juniors and wanted something to run them together without ABY switching and I knew I didn't need a transformer for hum cancellation having tried the concept out with a stereo pedal, no phase problems either. So enter the Spluffer Very simple little kit, well laid out, good instructions, had it up and running sans enclosure in about an hour and that includes reversing the diode that I still managed to get the wrong way round despite checking first doh!. Discovered that tidy soldering takes some practice. Does the job splendidly and as far as I can tell with little or no effect on tone, I am a fan of buffers at the start and finish of my pedal chain in any case. Thanks Fuzzdog, maybe I ll attempt something more complex next time, I have my eye on the P45 phaser." David - 24 May 2015

Don't forget to download the
General Build Guide

 

PRE-BUILT KITS:
We're only building for UK customers right now. Please don't order from elsewhere as we'll simply have to refund you. You're currently looking at two weeks for pre-built pedals. Hang tight!

 

PLEASE NOTE:
Full kits DO NOT include enclosures unless you select them in the 'Kit Type' drop-down menu.