Eagle Claw Overdrive

As with many boutique boxes, this one owes a lot to those that came before. Is it Tube Screamer? Is it Guv'nor? It's the best of both.

A huge gain range, from slightly dirty boost to all-out distortion, coupled with an incredibly versatile active 3-band EQ, makes this a one-stop-dirt-shop.

Add the Presence control into the mix and you have control over the top and upper mids, essentially a brightness control.

Vertical-mount pots are highly recommended for this build, but please note they have a round shaft - you'll need knobs with set-screw fitting.

Pot spacing is very tight (18.5mm), so you'll need small knobs. 1900H fit well. Builds only available with vertical-mount pots.

NOTE: This is entirely unrelated to the Parasit Studios fuzz with the same name. We're cool.

Partial kit: PCB, all board-mounted components, pots.

Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED.

Enclosure (pre-drilled) is only available with full kits, and will not take a battery. Knobs are not included.

Builds are only available with full kits including enclosure and vertical-mount pots. Please choose appropriate knobs.

Difficulty: Medium

PCB size: 50 x 36mm

Knobs required: 6

Enclosure: 1590B

Direct-Connect compatible (4-way)



Pedal Parts


£31.20 inc. tax

£26.00 ex. tax
? Tax based on United Kingdom.

Customer Reviews

1 review(s) posted (write review)
Awesome, versatile pedal 5 product stars
"Instructions were spot on and the pedal was built in no time. Hats off to Fuzzdog again for those. The pedal is fantastic. So many sounds thanks to the bas/mid/treb pots and control of darker pickups with the presence pot too. You can go from slight breakup to lovely heavy sounds no problem. Another fantastic pedal" Elbeeuk - 06/08/2017

Recently Viewed

Full kits DO NOT include enclosures unless you select them in the 'Kit Type' drop-down menu.

Don't forget to download the appropriate daughterboard build document for your kit:
Standard 3PDT