FuzzPup Sunny-T - cranked Sunn Model T tones

This is part of our FuzzPup range of circuits designed for 1590A builds. Please read the general build doc available here and ensure you're happy with what's involved. They're not especially difficult, but working in a confined space can be fiddly. Take heed.

Of course there's nothing stopping you using these PCBs for 'standard' builds. They're Direct Connect compatible.

A different PCB is available for 'standard' 1590B builds - see the related products listed below.

Who wouldn't like a Sunn Model T in their set-up? Bet you can't name one person. If you can, unfriend them immediately as they have no taste. No sir.

Well, truth is you're probably not getting one any time soon, so have yourself a little box of dirt to get you in the mood.

Now, we can't vouch for how close this gets to that elusive tone, but this power amp-based distorting doohicky sounds real good, and is a lot more versatile than you might expect from a one-knob-job (yes - you can have the kit with two knobs if you prefer - we just like the term 'one knob job'). Your guitar volume control is your friend here, and the Sunny-T will respond nicely to some twiddling, from low-gain dirty grit to all-out 'please turn it down!' speaker melt.

Keep it simple with volume control only, or add a a gain control to the circuit input, which will act just like your guitar volume.

Partial kit: PCB, all board-mounted components, pots.

Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED.

Enclosure (pre-drilled) is only available with full kits, and will not take a battery. Knobs are not included.

Builds are only available with full kits including enclosures. Please choose appropriate knobs.

Supplied with 9mm pots (round shaft) in two knob format, 16mm pot (splined shaft) for one knob.

Difficulty: Hard

PCB size: 25 x 44mm

Knobs required: 1 or 2

Enclosure: 1590A

Direct-Connect compatible (6-way)


Please also read this general guide to FuzzPup builds.

Note: image with circuit board in the enclosure is to illustrate the way this kit connects.


Pedal Parts



£22.80 inc. tax

£19.00 ex. tax
? Tax based on United Kingdom.

Customer Reviews

No Reviews Posted Yet - be the first! (write review)

Recently Viewed

Full kits DO NOT include enclosures unless you select them in the 'Kit Type' drop-down menu.

Don't forget to download the appropriate daughterboard build document for your kit:
Standard 3PDT