Product Added to your Cart
x

-------- OR --------

FuzzPup Llamatron

This is part of our FuzzPup range of circuits designed for 1590A builds. Please read the general build doc available here and ensure you're happy with what's involved. They're not especially difficult, but working in a confined space can be fiddly. Take heed.

Of course there's nothing stopping you using these PCBs for 'standard' builds. They're Direct Connect compatible.


Take Craig Anderson's Tube-Sound Fuzz circuit, add some tiny tweaks, give it a silly name.

Well, it seemed to work, and the circuit is a doozy, so good luck to the fella.

Great range of tones from mild overdrive to full-on fat fuzz, with warmth all the way.

Circuits with such a low parts count shouldn't be capable of such versatility!

Also available with a standard format PCB for 1590B builds - check the related products listed below.


If you want the PCB without parts there's a link for that at the bottom of the page.

Partial kit: PCB, all board-mounted components, pots.

Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED.

Enclosure (pre-drilled) is available as an option with full kits, and will not take a battery. Knobs are not included.

Builds are only available with full kits including enclosures. Please choose appropriate knobs.


Supplied with 9mm pots (round shaft)

Inspired by: Red Llama

Difficulty: Hard

PCB size: 25 x 47mm

Knobs required: 2

Enclosure: 1590A

Direct-Connect compatible (6-way)


Download the INSTRUCTION PDF

Please also read this general guide to FuzzPup builds.

Note: image with circuit board in the enclosure is to illustrate the way this kit connects.

FPSoda

Pedal Parts

110.0g

New

£24.00 inc. tax

£20.00 ex. tax
? Tax based on United Kingdom.
Updating Order Details
Please do not refresh or navigate away from the page!

Customer Reviews

1 review(s) posted (write review)
The 'more' pedal 5 product stars
"I already owned a llama kit and wanted to make a smaller, lower gain one. So I reduced the power resistor (from 1k to 100 ohms) and the resistor in the second feedback loop (1 meg to 300k). Not a huge reduction but worth it for my needs. Can sound 100% transparent until you dig in so sounds great with your amp. The fuzzpup kits are a bit fiddly but if you can solder you can solder, just read the manual carefully because I didn't." Alan - 08 September 2018

Don't forget to download the
General Build Guide

 

PRE-BUILT KITS:
We're only building for UK customers right now. Please don't order from elsewhere as we'll simply have to refund you. You're currently looking at two weeks for pre-built pedals. Hang tight!

 

PLEASE NOTE:
Full kits DO NOT include enclosures unless you select them in the 'Kit Type' drop-down menu.