Please read the general build doc available here and ensure you're happy with what's involved. A supplementary document detailing the double builds is on the way.
Of course there's nothing stopping you using the double-bypass daughterboards for 'standard' builds. They're Direct Connect compatible.
Double the fun of all your usual FuzzPups, this listing gives you the option for two pups in one 1590BB enclosure. As more circuits are added to the range they'll be made available here.
Peruse the FuzzPup range, see which two you'd like in one enclosure, then pick your options below. Choose which you'd like on the left and right sides of the box (viewed from the outside, not as you'd see it when building from the inside), and we'll do the rest.
Drilling for pots and switches is done sensibly, but if you have any special requests please add them as a note at checkout.
Basic options are to have the pots for both circuits spread evenly across the enclosure for a neater appearance, or bunched slightly on each side so it's clearer which is for which circuit. Take a look at the sample images to the left.
Different positioning is available for the jacks and DC socket. Note: side mounted jacks will be quite close to the top surface of the enclosure, as in the 1590A versions, to ensure they clear the circuit boards sufficiiently. Top mounted jacks will be closer to the bottom surface. If you want a side mounted DC socket please state LEFT or RIGHT.
There's also the option to add an order switcher. At the moment the toggle switch will point to the selected circuit that comes second in the chain. We may change the PCB in future. Order switcher option does not include the ribbon cable - see link below if you want to add that.
Kit includes: PCB, all components, hook-up wire, 3PDT footswitch for true bypass, jack sockets, DC socket, battery snap, LED, footswitch daughterboard and header pins. Enclosure (pre-drilled) is optional and will not take a battery. Does not include knob(s).
Supplied with 16mm pots (round shaft)
PCB size: 25 x 40mm
Knobs required: Sorry, you'll have to work that out.
Direct-Connect compatible (6-way)
If you want the kit pre-built you must add the enclosure option below and select your knobs in the Components section. Check Enclosures section for powder-coated enclosure availability.
Download the INSTRUCTION PDF
Please also read this general guide to FuzzPup builds.
Note: image with circuit board in the enclosure is to illustrate the way this kit connects.