Country Crunch Drive

Don't let the name fool you. This signature pedal of a well known country slinger is so versatile it could sit on any board.

From almost clean boost, through a bit of hair, to all out screaming solo drive, this box has it all while keeping its composure (and your tonal integrity).

Your standard Volume, Gain and Tone (we'll get to that shortly) controls are augmented by a prescence switch to make it sounds as good with your Tele as it does with your LP. Add to that the three way mids switch and you have countless settings to play with.

The original uses a C25K pot for the Tone control, and try as we might we can't grab any in vertical pin format. We've spent a long time trying it with every different combo of pot value and tapering resistor, and the best workaround we've found is simply C50K with a 51K resistor across pins 1 and 3. There's still a little bunching at the extreme ends of the turn, but it's a very useable work-around. If you don't fancy that, don't buy it.

Available with board-mounted pots (round shafts) or wired (splined shafts), though the wired option will still be supplied with C50K/51K resistor. The two switches mount direct to the PCB, so either pot option will still give you a solid mount in the enclosure.

Partial kit: PCB, all board-mounted components, pots.

Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED.

Enclosure (pre-drilled) is only available with full kits, and will not take a battery. Knobs are not included.

Builds are only available with full kits including enclosure and vertical-mount pots. Please choose appropriate knobs.

Difficulty: Medium

PCB size: 50 x 50mm

Knobs required: 3

Enclosure: 1590B

Direct-Connect compatible (4-way)



Pedal Parts


£33.60 inc. tax

£28.00 ex. tax
? Tax based on United Kingdom.

Customer Reviews

1 review(s) posted (write review)
Great pedal 5 product stars
"This was my first ever pedal build. I have no electronic knowledge but can use a soldering iron and follow a plan. No more complex than my sons Star Wars lego plans ! I have a multimeter and identified the resistor values with it , muck easier than squinting at bands although I checked them as well. Pedal worked at testing stage but not once wiring foot switch,this was my fault as i had the switch lugs 90' sideways, googled switches and worked this out. Looking at the drawing this was obvious as the lugs are oblong .Have ordered and recieved my new tri verb build and found FD to be brilliant at delivery communication etc." Steve Collop - 05/01/2017

Recently Viewed

Full kits DO NOT include enclosures unless you select them in the 'Kit Type' drop-down menu.

Don't forget to download the appropriate daughterboard build document for your kit:
Standard 3PDT