Product Added to your Cart
x

-------- OR --------

Cone Ripper - Filthy OD/Fuzz

Noisy, uncompromising, signal-tearing gain.

The Cone Ripper kit comes with parts to make a few different variations, all of which will have you running for cover.

  • Cone Ripper - broken overdrive that sounds like you've got a ripped speaker in your cab.
  • Butt Flush Fuzz - Stupidly high gain fuzz fun - heavy as you like.
  • American Octave - tight, gated fuzz.
  • No Way Drive - Crazy high-gain fuzz with pronounced octave-up.

All of the above sound different enough to warrant having one of each on your board, but you can mess around with the build and get a few different configurations going by adding a toggle switch or a pot. You won't be able to switch into the American Octave or No Way Drive, as these require parts taken out or orientation of transistors flipped, but altering the bias of the first gain stage transistor makes a huge difference to the sound. Check the build document for more details.


If you want the PCB without parts there's a link for that at the bottom of the page.

Partial kit: PCB, all board-mounted components, pots.

Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED.

Enclosure (pre-drilled) is available as an option with full kits, and can take a battery if desired with footswitch positioned 22mm higher, closer to the controls. Knobs are not included.


Inspired by: Torn's Peaker / US / Never Drive / Aenima

Difficulty: Easy

PCB size: 50 x 30mm

Knobs required: 2 (or 3)

Enclosure: 1590B

Direct Connect compatible (4-way)


Download INSTRUCTION PDF

ConeRip

Pedal Parts

130.0g

New

£27.60 inc. tax

£23.00 ex. tax
? Tax based on United Kingdom.
Updating Order Details
Please do not refresh or navigate away from the page!

Customer Reviews

1 review(s) posted (write review)
Definitely ripping! 5 product stars
"This is a sweet OD/Fuzz. I used a pot for R3 to have all the glitch variations possible. All the way back is a solid crunchy OD and all the way clockwise tears your speakers to shreds! One mod I did to mine and I suggest doing, is replacing the input cap with a .82uF. When I used the stock value i found it had no low end. Once i replaced the cap...viola!! Lows for days! Excellent pedal and easy build. Would recommend!" Bill - 09 May 2017

Don't forget to download the
General Build Guide

 

PRE-BUILT KITS:
We're only building for UK customers right now. Please don't order from elsewhere as we'll simply have to refund you. You're currently looking at two weeks for pre-built pedals. Hang tight!

 

PLEASE NOTE:
Full kits DO NOT include enclosures unless you select them in the 'Kit Type' drop-down menu.